SynthoCAM H2O 24mm

The SynthoCAM H2O 24mm is engineered for the inspection of live potable water mains between 2″ and 6″ in diameter. Designed to work with compatible insertion devices, the system can be deployed without interrupting customer supply, supporting efficient and non-disruptive network investigations.

The system is pressure rated up to 10 bar, making it suitable for use across water distribution mains. Its 24mm camera head is optimised for insertion into live pipes ranging from 3″ to 6″ via pressure-balanced insertion methods, such as bore hydrants or 80mm valves with adaptor flanges. It can also be used in pipes as small as 2″ using end-on insertion techniques.

A 50 metre push rod allows operators to survey up to 100 metres from a single excavation, improving efficiency and reducing the need for multiple access points. The 6mm push rod diameter provides a balance of flexibility and control, allowing the system to navigate tight bends.

In addition to visual inspection, the SynthoCAM H2O 24mm incorporates integrated leak detection technology, enabling engineers to gather more comprehensive data during a single deployment. This supports better decision-making prior to excavation and repair.

Both the cobra push rod and camera head are traceable, with built-in line tracing capability when used with a signal generator. A sonde integrated into the camera head allows accurate surface location of the camera during operation.

Overall, the SynthoCAM H2O 24mm provides a practical solution for live water pipe inspection and leak detection, helping utilities improve network insight while minimising disruption.

• Designed for Live Potable Water Pipes (2″–6″)
Suitable for inspection of small to medium diameter water mains without service interruption.

• Integrated Leak Detection Capability
Combines CCTV inspection with leak identification in a single deployment.

• Pressure Rated up to 10 Bar
Safe and reliable operation within live water distribution systems.

• 24mm Camera Head
Optimised for insertion into 3″–6″ pipes via pressure-balanced systems.

• Multiple Insertion Methods
Compatible with bore hydrants, 80mm valves with adaptor flange, and end-on insertion for smaller pipes.

• 50m Push Rod with 6mm Diameter
Enables up to 100m inspection range from a single excavation while maintaining flexibility.

• Traceable Cobra and Camera Head
Supports accurate positioning using signal generator and locating equipment.

• Integrated Sonde
Allows precise surface tracking of the camera location during inspections.

• Reduced Excavation Requirements
Helps minimise digging, reinstatement and associated costs.

• Supports Pre-Excavation Decision Making
Provides clear visual and leak detection data to guide maintenance and repair planning.